英飞凌多功能功率开发套件是英飞凌面向高校电力电子教学及实践课程推出的实验套件，旨在支持中国高校基础教学和创新人才实践培养。该套件中包含了升压、降压电路，AC / D C、D C / D C、DC/AC等经典电路，可实现电力电子、电机拖动等电气工程类课程教学实验。同时, 套件中预留了多处采样电路，方便在此基础上进行二次开发和实验拓展。套件同时配备了IGBT 以及低压MOSFET电路板, 并采用了模块化设计，使用者可根据不同的应用场景进行两者的方便切换。目前，该套件已在多所高校成功试用，未来，将进一步推广至更多高校。
In addition to the precautions listed throughout this manual, please read and understand the following statements regarding hazards associated with development systems.
Attention: The ground potential of the Multifunction Power Design Kit is biased to a negative DC bus voltage potential. When measuring voltage waveform by oscilloscope, the scope’s ground needs to be isolated. Failure to do so may result in personal injury or death and equipment damage
Attention: Only personnel familiar with the drive and associated machinery should plan or implement the installation, start-up and subsequent maintenance of the system. Failure to comply may result in personal injury and/or equipment damage.
Attention: The surfaces of the drive may become hot, which may cause injury.
Attention: Multifunction Power Design Kit contains parts and assemblies sensitive to Electrostatic Discharge (ESD). Electrostatic control precautions are required when installing, testing, servicing or repairing this assembly. Component damage may result if ESD control procedures are not followed. If you are not familiar with electrostatic control procedures, refer to applicable ESD protection handbooks and guidelines.
Attention: Wiring or application errors such as under sizing the motor, supplying an incorrect or inadequate DC supply or excessive ambient temperatures may result in system malfunction.
Attention: Wait three minutes after removing power from the power drive to discharge the bus capacitors. Do not attempt to service the drive until the bus capacitors have discharged to zero. Failure to do so may result in personal injury or death.
Attention: Multifunction Power Design Kit is shipped with packing materials that need to be removed prior to installation. Failure to remove all packing materials which are unnecessary for system installation may result in overheating or abnormal operating condition.
Edition 2020-02-28 Published by Infineon Technologies China Co. Ltd., Shanghai, China
Copyright © 2019 Infineon Technologies China Co. Ltd., All Rights Reserved.
Do you have a question about any aspect of this document? Email: UP.China@infineon.com
IMPORTANT NOTICE AND DISLAIMER
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics or any other kind. The Multifunction Power Design Kit or any the product of Infineon Technologies shall not be used in any application where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.
WITH RESPECT TO ANY EXAMPLES, HINTS OR ANY TYPICAL VALUES STATED HEREIN AND/OR ANY INFORMATION REGARDING THE APPLICATION OF THE PRODUCT AND CONTAINED IN THIS DOCUMENT, INFINEON TECHNOLOGIES HEREBY DISCLAIMS ANY AND ALL WARRANTIES AND LIABILITIES OF ANY KIND, TO THE FULL AND MAXIMUM EXTENT PERMITTED BY LAW, INCLUDING WITHOUT LIMITATION WARRANTIES OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY.
In addition, any information given in this document is subject to user’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning any use of Multifunction Power Design Kit or any product of Infineon Technologies in the intended applications. The data contained in this document is exclusively intended for technically trained staff and for training purpose only. It is the responsibility of user to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application.
Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office.